Sekarang bagaimana cara merestore driver yang tidak support itu yang di peruntukan windows versi yang lama tapi masih bisa di pake pada windows 10. Driver os lama gak bisa di pake di windows versi berbeda karena driver signature atau bahasa awam nya belum di uji kelayakanya jadi tidak bisa langsung di instal sembarangan.
This page describes how to install an image to the nand flash of Marsboard RK3066, ie, how to flash the board. You can choose to either flash the whole image (ie, update.img) to the board or just flash the selected partitions. You can download the prebuilt images or from our server the images.
2Windows
2.1Install driver
2.2Flash Image
3Linux
3.1Using Linux Upgrade Tool to flash update.img
Before you start
Keep in mind that:
What you will need to flash the board is:
a MarsBoard RK3066 board
a PC running Windows (XP 32/64bit, Windows 7 32/64 bit) or Linux (32/64bit)
a micro USB cable with one side plugged in to the OTG port of MarsBoard and the other side plugged into the USB port on PC.
Windows
The Windows tool for flashing the image is provided by Rockchip. To flash the update.img, you need to use the RKBatchTool and to flash the partitions, you will need to use RKDevelopTool. Both RKBatchTool and RKDevelopTool rely on the RK USB driver so you will need to install it first as below:
Install driver
There two ways to install the driver under Windows:
install using RKDriverAssistant tools - the easy way
install manually
If you have already installed the USB driver please skip this step.
Install using RK Driver Assistant tools
There’s no need to connect your Rockchip device during this procedure just download and extract RKDriverAssistant.zipThen double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility.If you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first.
Then click “Install Driver”, and depending on your version of Windows the Security below may show up twice during installation. Just click “Install”
when the driver has finish installing then shut down MarsBoard and connect the MarsBoard to your computer and let the board go to recovery mode, then your computer will detect the board and you will see it within device manager.
Now the driver should have been installed successfully!
Install Manually
Download the file (Rockusb_Driver_v3.7.rar) from here and shut down the MarsBoard then connect the MarsBoard to the computer and let the board go to recovery mode. After your computer should detect the board and you will see an unknown device within device manager.
Select the Unknown device then right click and select 'Update Driver Software'.
Select 'Browse the computer for driver software'.
Find the file unzipped file you downloaded earlier (Rockusb_Driver_v3.7.rar) and select either the 32/64bit folder then click 'OK' to install.
When the driver is installed successful you will then see a Rockusb Device in the device manager window.
Now the driver is installed successfully.
Flash Image
There are two methods to flash an image use android tools.
use Download Image (can flash by partitions)
use upgrading firmware (flash update.img only, it will erase everything.)
Using AndroidTool to flash update.img (Firmware)
Download AndroidTool from here. Then unzip it and double click AndroidTool.exe
Select an image (RK3066 update.img), click Firmware. For information on how to make an update.img see update.img
Power down the MarsBoard and connect the MarsBoard to the computer then let the board go to recovery mode after the program should detect the device.
Click the 'Upgrade' button to begin flashing and when the flashing process finishes successfully you will see the following interface.
If the flashing has aborted ,it could possibly be an error with the update.img, you can either try to redo the operations above or make the update.img again!
Using AndroidTool to falsh image by partition
Download AndroidTool from here. Unzip it the file and double click AndroidTool.exe.
Power down the MarsBoard and connect the MarsBoard to the computer and let the board go to recovery mode then the program will detect it.
There are eight selections to choose from so select the correct row and then select the checkbox to the left of the row to select it. After you must click the column on the right side for the path of the file you want to flash. You can then select one or more files and flash them at once. Finally Click 'Run' to flash images to the device (the right most selection shows the log of the progress).
If successful the board will disconnect from the tool and boot into the system.
Please Note:
The kernel is contained within the boot.img when you package the image by './mkimage.sh ota' please see Android Build for more information.
you can flash one of more image at one time as needed
Preparing IDB failed
This happens at upgrading bootloader, if you need to upgrade the bootloader or the update.img contains a new bootloader, you probably will meet this. The marsboard is 'bricked'. Follow this unbrick instructions to unbrick it.
Linux
Rockchip has provided tools for upgrading within Linux (closed source) since Android 4.4. The initial RE work of the Rockchip bootloader updating protocol is by naobsd and has been improved by some in rkflashtool. linuxerwang has made a GUI version of the rkflashtool called rkflashkit.
Warning: both rkflashtool and rkflashkit can not flash the update.img.
Using Linux Upgrade Tool to flash update.img
Download the Rockchip linux upgrade tool here. Unzip it and you will get a file called upgrade_tool which is a binary executable file under Linux.
Flash update.img
Let the board go to recovery mode and run the following command to flash the update.img:
Lowlevel Format nand
If you have an error with upgrading you can low level format the nand flash first with the following command:
Flash parameter
Flash bootloader
Flash the boot.img
Flash the kernel.img
Others
There are other commands in the upgrade_tool, such as:
Installing RkFlashKit
In order to install RkFlashKit in Debian or Ubuntu, you need to get the source code, build it,You can download the pre-built rkflashkit here or build it yourself with the following command:
And install it with the following command
Flashing firmware with RkFlashKit
Run it with the following command
The tool is similar to RkAndroidTool as it can burn partition images to specific partitions. You’ll need to enter recovery mode just like you would do in Windows, by pressing the recovery button, before powering the device via the USB port, and connect the USB cable to your PC. RkFlashKit should automatically find your device, so you just have to select the correct NAND partition, select the image file to flash, and click on Flash image.
Click the Nand partition and you will see the partitions of the board listed then choose the one you want to flash.
Choose the location of the image you want to flash to that partition.
Click the 'Flash image' button and it will start flashing
After it's finished click 'Reboot Device' button to reboot the board.
Flash RKBatchTool Firmware File with RkFlashKit
the firmware updates are often distributed using RKBatchTool file format, which can not be directly handled by RkFlashKit. Luckily, there are some other tools available to extract the partitions file from such firmware.
You’ll first need to build rk-tools:
Then use img_unpack tools to unpack the firmware to another format:
Finally, run afptool to extract the files from the resulting file into “firmware” directory:
Now that we’ve got our partition files, simply use RkFlashKit as mentioned above.
Please enable JavaScript to view the comments powered by Disqus.blog comments powered by Disqus
Retrieved from 'http://www.hotmcu.com/wiki/index.php?title=Flashing_Firmware_Image_Files_Using_The_Rockchip_Tool&oldid=6437'
Asus is a rapidly expanding manufacturer name making budget-friendly devices with significant features attached. But when that is not enough for advanced users who expect more than what is in the stock frame, we could not miss talking about flash. And it is Asus Flash Tool which flashes Stock firmware on Asus devices and does more similar to which takes Android running Zenfone. To learn here about all with Asus Flash, go on reading.
With support Android running Zenfone gets with this flash utility, we hear calling it Asus Zenfone Flash tool. Just as many similar flash applications, this is too come supporting through Windows PC. With the updated release of version, it now adds support for many Android running Zenfones making stock firmware flash and more similar to 100% success. But remember that it only supports RAW ROM packages.
Asus Flash Download - Direct Links Zone
The flashing application is compatible with all Windows platforms up to Windows XP. Considering the compatible field it shows Windows XP, Vista, 7, 8/8.1 and 10 as results. Original Asus USB driver installation is an urgent requirement for the manner. Asus Tool download can perform on both 64-bit and 32-bit operating systems as well. Click on respective direct download link and pick the awesome flashing app to repair Asus devices in an easy way.
Unzip Password: asusflashtool.com
Asus Flash Tool Features
Although it is a small tool package in the measures, it is a powerful tool when comes to the processing. So let us see how it functions through the features it takes.
Flash Stock Firmware
The tool here supports flashing Stock firmware on any Asus Zenfone model. With correct firmware downloaded, you can upgrade/ downgrade easily through download Asus Flash.
Allows to Backup Apps
Not all of the flash utilities are ready to support in backup apps. But luckily, Asus Zenfone Flash Tool here is doing that perfectly supporting backup apps and restores. The apps include which the user has installed on the device. But here it lacks support to backup application data which related to restoring settings of the app.
Backup System Apps
It also carries support in backup system apps which you would be able to restore easily. For the ease of the user, the app files going to save in the format of .ab on the computer.
Progress bar Feature
One of the interesting things about download Asus Flash is its simple and upfront UI where you only required for selecting the correct file and direct to process. And with the live progress bar, we could see the process of the program from which we could see whether data is connected and the program is still going.
Download Asus Flash Tool latest Version
Developers keep updating the tool in the match to various requirements. So as of now, we find Asus v2.0.1 tool as the latest with the following changes.
Addresses automatically closing the program after several seconds
Fix is giving to the layout in the tab Backup/Restore
Additionally, the latest version is bringing guaranteed success since it takes improvements to the work frame as well. But in case if you fail getting paired with the latest tool update, try any previous but checking the compatibility for several times.
How to Install Asus Flash Tool on the PC?
Download Asus Zenfone USB drivers software on the Windows PC and install
Download Asus Flash Tool on the PC and extract to get workable extensions
Then Double click on the exe file and continue with 'next'. And go to 'Install' option for which you would get a security message which needs to be continued with 'OK'
That will make the flashing tool to be installed on the PC
Video Guide
Refer the video tutorial to bypass issues that arise while installing the application.
How to use Asus Zenfone Flash Tool to Flash Stock firmware?
Before moving to process, you need booting the smartphone to Developer mode while also enabling the USB debugging mode from settings. Then download correct Asus Zenfone Stock firmware file to the PC. And equally, give concern to backup the whole device from which only you can save all your existing data.
Step 1: Launch Asus Tool and connect the device
Step 2: After clicking on disconnected button, browse and add the Stock firmware file in the right place
Step 3: Let the process start and restart the device automatically. You here need switching to Recovery mode by long press and hold Volume down and up keys
Step 4: In the Recovery mode, go to update ADB with 'apply update from ADB' and start from where the flashing is paused
Step 5: At the end of all processing, restart the device and then disconnect from the PC
The process would probably take 5 to 10 minutes. So take the whole responsibility at your hand and pay good attention to the processing.
Developer Thanks
For making the successful attempts on the whole development of download Asus Flash Tool we should share our sincere thanks to Pawneshwer Gupta. So with the time reaching there will be more to download with updated tool frame and added functionality.